Cookies Like most sites, DiskDepot.co.uk uses cookies. If you're interested in finding out more, click here. If you continue to use the site, we'll assume you're okay with this.

Welcome to Disk Depot

Computing

This is a backlight filter for the Apple iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus. Suitable for micro soldering...

In stock

Specifications Series: Kingston ValueRAM DDR Type: SODIMM DDR3 Size: 4GB Speed: 1600 MHz Compliance: PC3L-12800 Pins: 204-pin CAS Latency: CL11 Data...

In stock

This is your classic, no-nonsense mousemat with a sturdy foam base and non-slip fabric covering to give you the best surface. Works effectively with...

In stock
+

This is your classic, no-nonsense mousemat with a sturdy foam base and non-slip fabric covering to give you the best surface. Works effectively with...

In stock
+

This is your classic, no-nonsense mousemat with a sturdy foam base and non-slip fabric covering to give you the best surface. Works effectively with...

In stock
+

This is your classic, no-nonsense mousemat with a sturdy foam base and non-slip fabric covering to give you the best surface. Works effectively with...

In stock
+

This adaptor joins two network cables together into a single longer cable- simply plug one cable in each end of the adaptor, and you can extend the...

In stock
+

O ne Supplied. Panel Mount for Laptop and Other Uses - DC Power Jack - 3.0mm 3mm Centre Pin - Our Number: PJ15

In stock
+

A 1.8 metre mini USB2.0 cable for connecting devices such as mobile phones, hubs and MP3 players to your PC.

In stock
+

This is an FL24 Backlight Filter for iPhone 5. Suitable for micro soldering and component-level repairs. Shipped direct from our UK warehouse for next...

In stock
+

This is an FL27 Filter for Apple Devices. Suitable for micro soldering and component-level repairs. Shipped direct from our UK warehouse for next working...

In stock
+

This is a backlight filter for the Apple iPad 4. Suitable for micro soldering and component-level repairs. Shipped direct from our UK warehouse for next...

In stock
+

This is a L2201 LCD Display Image Filter for iPad 2 3 4 Mini motherboard. Suitable for micro soldering and component-level repairs. Shipped direct from...

In stock
+

If you have an older drive or other device that only includes the "four pin" power input (such as a PATA/IDE model), but your computer's power supply only...

In stock
+

If you have ADSL type broadband Internet, you need one or more of these for each phone line you have ADSL installed on. Plug your phone or phone extension...

In stock
+

USB cable with "A Male" connectors on both ends. This cable is intended ONLY for connecting computers and peripherals that both have "A" sockets and are...

In stock
+

Extend your USB cable with this extension cable. (Please note; USB cables should not be extended to a distance of more than 5 metres, as this is the...

In stock
+

This is a tristar USB logic and charging IC. Chip comes pre-balled with solder balls. Usable with Apple iPhone 5, Apple iPad 4, Apple iPad Mini (original...

In stock
+

This is a backlight capacitor for the Apple iPhone 6 and iPhone 6 Plus. Suitable for micro soldering and component-level repairs. Shipped direct from our...

In stock
+

This is a C5202_RF capacitor for the Apple iPhone 6. Suitable for micro soldering and component-level repairs. Shipped direct from our UK warehouse for...

In stock
+

This cable has an "RJ11" type connector on both ends. It suitable for a variety of uses, including as a cable suitable for connecting your ADSL modem or...

In stock
+

This is a D1501 backlight diode. Usable with the iPhone 6 and iPhone 6 Plus. Suitable for micro soldering and component-level repairs. Shipped direct...

In stock
+

USB 3.0 cable, "A" male connector to "A" male connector type. Backwards compatible with USB 2.0 and USB 1.1 sockets. Please note: For safety reasons, you...

In stock
+

This is a J2019 LCD connector for the Apple iPhone 6 only. (Not 6 Plus). Suitable for micro soldering and component-level repairs. Shipped direct from...

In stock
+

This is a J2401 Digitizer/Touchscreen FPC connector for the Apple iPhone 6 only. (Not 6 Plus). Suitable for micro soldering and component-level repairs....

In stock
+

This is a J2019 LCD connector for the Apple iPhone 6 Plus only. Suitable for micro soldering and component-level repairs. Shipped direct from our UK...

In stock
+

This is a "Chestnut" display driver/boost IC. Chip comes pre-balled with solder balls. Usable with the Apple iPhone (5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE,...

In stock
+

This is a standard USB 3 cable (equivalent to the older USB 2 "printer cable" used by many standard peripherals) for use with devices that support the...

In stock
+

Power cable featuring standard UK mains plug on one end and the common "figure of eight" connection (see images) on the other. Please ensure that you fit...

In stock
+

CAT-5e UTP Network Cable (2 metres long) 2 metre Ethernet network cable. Meets the Cat-5e specification. Colour may vary.

In stock
+

A 1.8 metre USB2.0 cable for connecting devices such as scanners and printers to your PC.

In stock
+

One Supplied. List of compatible models * Sony VGN-BZ Series: VGN-BZ560, VGN-BZ560P, VGN-BZ560P20, VGN-BZ560P22, VGN-BZ560P28, VGN-BZ560P30,...

In stock
+

One Supplied. DC Power Jack Chassis Socket - for Laptop Power Adaptor Input - 2.5mm - Our Part: PJ19

In stock
+

ColorWay's simple, easy-to-use screen and monitor cleaning kit is perfect for anyone who doesn't want dirt degrading the quality of their viewing experience....

In stock
+

With standard UK wall socket plug on one end and C5 ("cloverleaf" or "Mickey Mouse") type connection on the other end. Please ensure that you are using the...

In stock
+

Backlight Glass Diode D4021. Usable with the iPhone 6S and iPhone 6S Plus. Suitable for micro soldering and component-level repairs. Shipped direct from...

In stock
+

This is a USB3 (USB 3) extension cable designed to be plugged into the computer end of an existing USB cable. Length is approximately 1.8 metres...

In stock
+

Mains cable with a standard UK 3-pin moulded plug. Supports up to 13 amps fuse- comes with 5 amp fuse. Socket on other end is IEC C13 ("kettle" type...

In stock
+

One Supplied. Jack shown with and without removable shield. With 1.65mm centre pin. List of compatible models * Compaq Armada: M700 * Compaq Presario...

In stock
+

This VGA and SVGA-compatible cable is two metres long and comes with male (stick-out pins) connections on both ends. While DVI and HDMI have...

In stock
+

I f you have a newer drive or other device that only includes the "SATA" power input, but your computer's power supply only has the solves the problem....

In stock
+

Centre pin: 2.0mm. One Supplied. Note: Jack shown with removable shield in place List of compatible models * Gateway: 600YGR/600YG2 * Gateway...

In stock
+

1.65mm centre pin. One Supplied. Note: Jack shown with removable shield in place List of compatible models * Acer Travelmate: 220, 230, 280, 330,...

In stock
+

1.65mm centre pin. One Supplied. List of compatible models * Acer Aspire 1200 Series * Acer Aspire 1400 Series * Acer Aspire 1410 Series * Acer Aspire...

In stock
+

One Supplied. List of compatible models Sony PCG-F Series: PCG-F150, PCG-F160, PCG-F180, PCG-F190, PCG-F250, PCG-F270, PCG-F280, PCG-F290, PCG-F340,...

In stock
+

2.0mm centre pin version. One Supplied. List of compatible models * Gateway Solo: 2200, 2250, 2300, 2500, 2550, 5100 Important: Item cannot be...

In stock
+

1.65mm centre pin. One Supplied. List of compatible models * Gateway: 200STM * Samsung: Q Series Important: Item cannot be returned once fitted....

In stock
+

2.5mm centre pin. One Supplied. List of compatible models * Fujitsu Lifebook: C2010 * Fujitsu Siemens Lifebook: C2010 Important: Item cannot be...

In stock
+